V80 aluminium or steel

V80 aluminium or steel
Single-walled 80 mm slats, classic profile design, available in two different versions: 1 or 1.25 mm thick aluminium, weatherproof, untreated surface, or 0.75 or 1 mm thick steel, sendzimir galvanized surface.

V80 aluminium or steel
Slats in a choice of aluminium or steel, the profile thickness is matched to the size of the door. Safeguarded against lateral shifting in the hinge area.
Standard surfaces: natural aluminium or sendzimir galvanized steel.

V80 colour coated (special surface)
As above, but with colour coating on one or both sides up to max.
6000 x 5000 mm (aluminium)
4500 x 4000 mm (steel)
at additional cost.
      
Standard untreated aluminium edge profile.

V80 L steel
Single-walled ventilation slats, only available for the steel version, 1 mm thick, with 5 mm perforation, approx. 25 % air flow.
Standard surface: sendzimir galvanized.
Colour coating on both sides at additional cost.

BoxControl D400 control unit
Standard for our rolling shutters and rolling grilles, ready for installation, only suitable for 400/230 V mains, includes 1.5 m connecting cable with 16 A CEE moulded plug and 2 x 5 m cables for connecting plug-in engine/limit switch, foil keypad for operating "Open-Hold-Close" in deadman position, can be enhanced, e.g., with the push buttons and key switches listed below (at additional cost).

All of the rolling shutters presented here comply with the requirements of DIN EN 13241-1.