TH100 natural aluminium with clear varnish
Thermorix TH100
Flexible, insulated aluminium rolling shutter for universal use in industrial and residential construction.
- Double-walled aluminium slats filled with rigid PUR foam
- The special slat design ensures a small roll diameter
- Effective slat height: 80 / 100 mm
- Slat thickness: 20 / 23 mm
- Also available with window slats
- Side guides made of sendzimir galvanized steel
- Non-wearing plastic seals all round
- Maintenance-free 400 V shaft-mounted drive
- Incorporated brake and fall protection
- 'Open-Stop-Close' button with deadman operation
TH100 Natural aluminium with clear varnish
100 mm aluminium louvres. More conventional profile section form with double-walled structure, also with heat-insulating core of polyurethane rigid foam, however approx. 23 mm thick. High level of surface stability through adhesive-free connection to shell and rigid foam.
TH100 Aluminium natural with clear varnish
With plastic end pieces to prevent lateral shifting and ensure quiet and smooth running operation. Standard finish: natural aluminium with clear varnish. Max. manufacturing dimension: up to about 12,000 mm door width. Standard untreated aluminium edge profile.
TH100 with paint coat (special surface)
As above but with colour coating on one or both sides up to max. 6,000 x 5,000 mm at additional cost. Standard untreated aluminium edge profile.
THGL100 aluminium glazed
Two-skinned glazed aluminium slats with window cutouts, two-skinned acrylic panes (transparent), max. 10 slats with window cutouts.
Surfaces identical to TH100.
BoxControl D400 control unit
Standard for our rolling shutters and rolling grilles, ready for installation, only suitable for 400/230 V mains, includes
1.5 m connecting cable with 16 A CEE moulded plug and 2 x 5 m cables for connecting plug-in engine/limit switch, foil keypad for operating "Open-Hold-Close" in deadman position, can be enhanced, e.g., with the push buttons and key switches listed below (at additional cost).
All of the rolling shutters presented here comply with the requirements of EN 13241-1.
