Buttons and switches

BoxControl D400 control unit

Standard for our rolling shutters and rolling grilles, ready for installation, only suitable for 400/230 V mains, includes 1.5 m connecting cable with 16 A CEE moulded plug and 2 x 5 m cables for connecting plug-in engine/limit switch, foil keypad for operating "Open-Hold-Close" in deadman position, can be enhanced, e.g., with the push buttons and key switches listed below (at additional cost).

Buttons and switch accessories (at additional cost)

Push button switch no. 2
For mounting, "Open-Hold-Close" function (the "Hold" button does not work in deadman operation mode), IP65 protection.

Surface mounted key switch no. 10
For mounting, in aluminium casing with mechanical cover lock, profile half cylinder (30/10 pitch), designation "On-Off", IP54 protection.

Surface mounted key switch no. 4
For mounting, in aluminium casing with mechanical cover lock, profile half cylinder (30/10 pitch), designation "Open-Hold-Close", IP54 protection.

Surface mounted key switch no. 5
For mounting, in aluminium casing with mechanical cover lock, profile half cylinder (30/10 pitch), designation "On-Off-Open-Hold-Close", IP54 protection.

Flush mounted key switch no. 7
For flush installation, in aluminium casing with mechanical cover lock, anodized front plate, profile half cylinder (30/10 pitch), designation "Open-Hold-Close", IP54 protection, necessary recess: W 80 x H 140 x D 75 mm.

Flush mounted key switch no. 6
For flush installation, in aluminium casing with mechanical cover lock, anodized front plate, profile half cylinder (30/10 pitch), designation "On-Off-Open-Hold-Close", IP54 protection, necessary recess: W 80 x H 200 x D 75 mm.

Pillar no. 9
with incorporated key switch no. 7, pillar 1000 mm high, galvanized.