T90-1 type N19 door with thick rebate



T90-1 type N19 fire-resistant doors - door with thick rebate
Single leaf, fire-resistant steel doors and wall flaps with thick rebate
  
Single, full-leaf steel doors and/or flaps, fire-resistant in accordance with DIN 4102, with door closer. Door leaf and frame galvanized and primed (powder-coated in RAL 9016).


Hardware
(if standard hardware is used, the profile cylinder must be lengthened by 5/15 mm)
Frames
Standard: Corner frame with sealing profile, counterframe, wrap-around or block frame or frame for butt wall connection optionally available
Sills
Type N19: Standard: A floor level; B1, B2, B3 with four-sided continuous frame or C with lower rebate or RS1 sealing sills with lowerable floor seal and/or RS2 hump sill optionally available
Surfaces
Door leaf and frame galvanized and primed (powder-coated in RAL 9016)



The following can also be supplied on request

• Fire-resistant glazing
  
• Smoke protection in accordance with DIN 18095
• Soundproof
  Type N19: 35 dB (tested for full-leaf and RS1 sill) both types tested to
  DIN EN ISO 140-3 evaluated in accordance with DIN EN ISO 717-1
  (laboratory values)
• Burglar resistant
  both sides tested to DIN ENV 1627 WK2 on full leaf version, to CS 1250 x 2500 mm on type N19. (Burglar resistance not permitted on both types for fire-resistant mounting walls or foam mortar walls)
• In stainless steel
  

 

 

Technical data

Model:	T90-1 type N19 door
	Resistance class / Type    Designation
Approved dimensions	Coordinating size (CS)	Min/Max width	625 - 1375
		Min/Max height	1750 - 2500
	with top panel	Max. height	–
	of which: Door	Max. height	–
	Smoke protection with top panel	Max. CS	–
Door leaf	Approx. leaf thickness		63
	Approx. sheet thickness		1,0 (optionally 1,5)
	Active leaf		–
	Inactive leaf		–
	Type of opening according	to DIN	Left or right
Walls	Masonry		≥ 175
	Concrete		≥ 140
	Foam mortar block / precision blocks		≥ 175
	Reinforced foam mortar wall panels		≥ 150
	F90 walls made of gypsum plaster-boards (in accordance with DIN 4102 part 4, table 48), please consult us about other walls		≥ 100
Versions	Fire-resistant in accordance with DIN 4102		+
	With fire-resistant glazing		+
	With additional top panel		–
	With additional smoke protection		+
	With additional soundproofing		+
	With additional burglar resistance		+
	In stainless steel		+
F90 glazing	Standard rectangular types of glazing with glazing profiles made of steel or, optionally, aluminium or stainless steel CS 2500 x 2500 or more pedestal moulding height ≥ 625 needed		–
	Standard round types of glazing with glazing profiles made of steel or, optionally, stainless steel + A9		–
	Special optional glazing, 130 x 150 to 770 x 1759, also available as multi-pane glazing, frieze widths ≥ 237 with glazing profiles made of steel or, optionally, aluminium or stainless steel		–
	Registration number		Z-6.20-1919

+ possible | – not possible

All dimensions indicated in mm
CS = Coordinating size
OFD = Outer frame dimensions
CP = Clear passage dimensions


Standard sizes: T 90-1 type N19 wall flap



Coordinating sizes (order sizes)	Nominal sizes (see below for calculation details)	Clear passage dimensions (see below for calculation details)	Outer frame dimensions (see below for calculation details)
750 x 2000**	760 x 2005	670 x 1960	832 x 2061
750 x 2125**	760 x 2130	670 x 2085	832 x 2186
875 x 1875**	885 x 1880	795 x 1835	957 x 1936
875 x 2000**	885 x 2005	795 x 1960	957 x 2061
875 x 2125**	885 x 2130	795 x 2085	957 x 2186
1000 x 2000**	1010 x 2005	920 x 1960	1082 x 2061
1000 x 2125	1010 x 2130	920 x 2085	1082 x 2186
1125 x 2000	1135 x 2005	1045 x 1960	1207 x 2061
1125 x 2125	1135 x 2130	1045 x 2085	1207 x 2186
1250 x 2000	1260 x 2005	1170 x 1960	1332 x 2061
1250 x 2125	1260 x 2130	1170 x 2085	1332 x 2186
1250 x 2250	1260 x 2255	1170 x 2210	1332 x 2312
1250 x 2500	1260 x 2505	1170 x 2460	1332 x 2561

Outer frame dimensions incl. 20 mm floor recess.
** Also available with spring hinge in accordance with DIN 18272
   
All dimensions indicated in mm
CS = Coordinating size
OFD = Outer frame dimensions
CP = Clear passage dimensions



Calculation of clear passage and outer frame dimensions

  

Further information is available in PDF format here:

• Frames for T30 and T90 fire-resistant doors and
  steel multi-purpose doors.
  Download PDF file
   
  
• Sills anchor plans for T30 and T90 fire-resistant doors and
  steel multi-purpose doors.
  Download PDF file
    
  
• Frame mounting hardware for T30 and T90 fire-resistant doors
  and steel multi-purpose doors.
  Download PDF file