T30 SKE 2 fire-resistant sliding door



Characteristics

• Double leaf
• Full leaf in modular element design
• Leaf and frame profiles galvanized
• Registration number Z-6.14-1319



Versions

• Fire-retardant in accordance with DIN 4102
• with door ingoing brake (radial damper)
• Also available with hold-open system
• Also available with pass door
• Also available with hook and catch lock
• Also suitable for low header or butt ceiling installation
• Also available with activation aids
• Also available with fire-resistant glazing
• Also available with smokeproofing

Description

Approved dimensions
Clear passage from upper edge of finished floor: from 2000 x 2000 to 8500 x 6000 mm. Sliding door leaves up to W 1500 mm must not be higher than max. 2500 mm (CP in each case).

Door leaf
Thickness: approx. 67 mm
Sheet metal: 1 mm
Weight: approx. 55 kg/m²

Door leaf must overlap the clear opening:
by > 100 mm at the sides
by > 75 mm at the header
(by > 85 mm in the case of low headers)

Storage area for opened door
- half of the clear passage width for each leaf + 200 mm
(plus additional 150 mm for low headers) plus closing weight box (symmetrical leaf division)
 
Necessary header height (mm) for
normal header/wall installation > 220
low header/ceiling installation > 125
(header panel height 115 mm for butt ceiling installation)
  
Necessary clearance to fire wall for supports in the storage area:
door without pass door 200 mm
door with pass door 250 mm

Additional features

Pass door with door closer
Standard without lower sill, door size max. 1000 x 2000 mm CP. A pass door may only be built into doors that are at least 1500 mm wide and 2100 mm high (CP in each case). Several pass doors are optionally possible..
  
T30 fire-resistant glazing

• in one or more panel fields: Standard pane size 270 x 630 mm, special pane sizes up to 450 x 1100 mm (longer lead times), requisite frieze width per panel field 190 mm on three sides, pedestal height 1150 mm.

• in pass doors (without floor sill): Standard pane size 460 x 610 mm, special pane sizes (longer lead times), requisite frieze width 125 mm on 4 sides.
       

Cover flaps for tracks, storage and/or inlet area
  

(*)
door without pass door 200 mm
door with pass door 250 mm
door with bag flap 280 mm

All dimensions in mm
CP = Clear passage dimensions
UEFF = Upper-edge finished floor
See page 5 for hardware and other optional features,
see pages 10/11 for planning and installation notes