T30-1 type N2/50 wall flap with thick rebate



T30-1 type N2/50 wall flap with thick rebate
  
Single, full-leaf steel doors, fire-retardant in accordance with DIN 4102, with door closer (depending on the model). Door leaf and frame galvanized and primed (powder-coated in RAL 9016).
Hardware
(If standard hardware is used on types N2/50, the profile cylinder must be lengthened by 0/10 mm).
Frames
Standard: Corner frame with sealing profile, optional counterframe. Wrap-around or block frames or frames for butt wall connections are optionally available for types N2/50, as is a block frame in front of the wall.
Sills
N2/50 flap: Standard B1; B2, B3, RS1 or RS2 optional. 

Surfaces
Door leaf and frame galvanized and primed (powder-coated in RAL 9016).



The following can also be supplied on request

• Fire-resistant glazing
• Top panel
• Smoke protection in accordance with DIN 18095
• Soundproof
• (not the version with top panel) type N2/50 flap: 42-45 dB,
  tested to DIN EN ISO 140-3, evaluated in accordance with
  DIN EN ISO 717-1 (laboratory value for full-leaf and B1 or B2 sill)
• Burglar-resistant
• (not for models with top panel) tested on both sides to
  DIN ENV 1627 WK2 N2/50 flap: only for floor recess up to ≥ 20 mm.
  (Burglar resistance for N2/50 doors not permitted for F90 walls made
  of gypsum plasterboard or foam mortar)
• In stainless steel

 

Technical data

Model	T30-1 N2 / 50 wall flap
	Resistance class / Type     Designation
Approved dimensions	Coordinating size (CS)	Min/Max width	500 - 1250
		Min/Max heigh.	500 - 1250
	with top panel	Max. height	–
	of which: Door	Höhe max.	–
	Smoke protection with top panel	Max. height	–
Door leaf	Approx. leaf thickness		53
	Approx. sheet thickness	up to CS 500 x 1750	1.0 (optionally 1.5)
	Active leaf		–
	Inactive leaf		–
	Type of opening	according to DIN	Left or right
Walls	Masonry		≥ 115
	Concrete		≥ 100
	Foam mortar block / precision blocks		≥ 115
	Reinforced foam mortar wall panels		≥ 100
	F90 walls made of gypsum plaster-boards (in accordance with DIN 4102 part 4, table 48), please consult us about other walls		≥ 100
Versions	Fire-retardant in accordance with DIN 4102		+
	With fire-resistant glazing		–
	With additional top panel		–
	With additional smoke protection		+
	With additional soundproofing		+
	With additional burglar resistance		+
	In stainless steel		+
F30 types of glazing	Rechteckige Standard rectangular types of glazing with glazing profiles made of steel or, optionally, aluminium or stainless steel CS 2500 x 2500 or more pedestal moulding height > 625 needed		–
	Standard round types of glazing with glazing profiles made of steel or, optionally, stainless steel		–
	Special optional glazing, 150 x 150 to 913 x 1921, also available as multi-pane glazing, frieze widths > 155 with glazing profiles made of steel or, optionally, aluminium or stainless steel (wall flap: min. CS 625 x 625 mm)		–
	Registration number		Z-6.20-2016

+ possible | – not possible

All dimensions indicated in mm,
CS = Coordinating size,
OFD = Outer frame dimensions,
CP = Clear passage dimensions


Standard sizes:
T30-1 type N2/50 fire-resistant door - wall flap with thick rebate, single leaf



Coordinating sizes (order sizes)	Nominal sizes (see below for calculation details)	Clear passage dimensions (see below for calculation details)	Outer frame dimensions (see below for calculation details)
750 x 750	760 x 760	670 x 670	832 x 832
750 x 875	760 x 885	670 x 795	832 x 957
800 x 800	810 x 810	720 x 720	882 x 882
875 x 875	885 x 885	795 x 795	957 x 957
875 x 1000	885 x 1010	795 x 920	957 x 1082
875 x 1250	885 x 1260	795 x 1170	957 x 1332
1000 x 1000	1010 x 1010	920 x 920	1082 x 1082
1000 x 1250	1010 x 1260	920 x 1170	1082 x 1332
1250 x 1250	1260 x 1260	1170 x 1170	1332 x 1332

All dimensions indicated in mm,
CS = Coordinating size,
OFD = Outer frame dimensions,
CP = Clear passage dimensions

 



Calculation of clear passage and outer frame dimensions
(not for T90-2 type N39)

  

Further information is available in PDF format here:

• Frames for T30 and T90 fire-resistant doors and steel multi-purpose doors.
  Download PDF file
   
  
• Frame mounting hardware for T30 and T90 fire-resistant doors and
  steel multi-purpose doors.
  Download PDF file
    
  
• Sills, anchor plans for T30 and T90 fire-resistant doors and
  steel multi-purpose doors.
  Download PDF file