T30-1 type N2/50 door with thick rebate



T30-1 type N2/50 door with thick rebate
  
Single, full-leaf steel doors, fire-retardant in accordance with DIN 4102, with door closer (depending on the model). Door leaf and frame galvanized and primed (powder-coated in RAL 9016).



Hardware
(If standard hardware is used on type N2/50, the profile cylinder must be lengthened by 0/10 mm).
Frames
Standard: Corner frame with sealing profile, optional counterframe Wrap-around or block frames or frames for butt wall connections are optionally available for type N2/50, as is a block frame in front of the wall.
Sills
N2/50 door: Standard A; B1, B2, B3 and RS1 or RS2 optional, and sill C with lower rebate.
Surfaces
Door leaf and frame galvanized and primed (powder-coated in RAL 9016).



The following can also be supplied on request

• Fire-resistant glazing
  
• Top panel
• Smoke protection in accordance with DIN 18095
• Soundproof
  (not the version with top panel) type N2/50 door: 34 dB, tested to DIN EN ISO 140-3, evaluated in accordance with DIN EN ISO 717-1 (laboratory value for full-leaf and RS1 sill on door)
  
• Burglar-resistant
  (not for models with top panel) tested on both sides to DIN ENV 1627 WK2 N2/50 door: only for floor recess up to ≥ 20 mm. (Burglar resistance for N2/50 doors not permitted for F90 walls made of gypsum plasterboard or foam mortar)
• In stainless steel
  

 

Technical data

Model:	T30-1 N2 / 50 door
	Resistance class / Type     Designation
Approved dimensions	Coordinating size (CS)	Min/Max width	625 - 1350
		Min/Max height	1500 - 2500
	with top panel	Max height	3500
	of which: Door	Max height	2450
	Smoke protection with top panel	Max. CS	3000
Door leaf	Approx. leaf thickness		53
	Approx. sheet thickness	up to CS 500 x 1750	1.0 (optionally 1.5)
	Active leaf		–
	Inactive leaf		–
	Type of opening	according to DIN	Left or right
Walls	Masonry		≥ 115
	Concrete		≥ 100
	Foam mortar block / precision blocks		≥ 115
	Reinforced foam mortar wall panels		≥ 100
	F90 walls made of gypsum plaster-boards (in accordance with DIN 4102 part 4, table 48), please consult us about other walls		≥ 100
Versions	Fire-retardant in accordance with DIN 4102		+
	With fire-resistant glazing		+
	With additional top panel		+
	With additional smoke protection		+
	With additional soundproofing		+
	With additional burglar resistance		+
	In stainless steel		+
F30 types of glazing	Standard rectangular types of glazing with glazing profiles made of steel or, optionally, aluminium or stainless steel CS 2500 x 2500 or more pedestal moulding height > 625 needed
	Standard round types of glazing with glazing profiles made of steel or, optionally, stainless steel
	Special optional glazing, 150 x 150 to 913 x 1921, also available as multi-pane glazing, frieze widths ≥ 155 with glazing profiles made of steel or, optionally, aluminium or stainless steel
	Registration number		Z-6.12-1482

+ possible  |  – not possible
      
All dimensions indicated in mm
CS = Coordinating size
OFD = Outer frame dimensions
CP = Clear passage dimensions


Standard sizes:
T30-1 type N2/50 fire-resistant door - door with thick rebate, single leaf.



Coordinating sizes (order sizes)	Nominal sizes (see below for calculation details)	Clear passage dimensions (see below for calculation details)	Outer frame dimensions (see below for calculation details)
750 x 2000	760 x 2005	670 x 1959	832 x 2060
750 x 2125	760 x 2130	670 x 2084	832 x 2185
875 x 1875	885 x 1880	795 x 1834	957 x 1935
875 x 2000	885 x 2005	795 x 1959	957 x 2060
875 x 2125	885 x 2130	795 x 2084	957 x 2185
1000 x 2000	1010 x 2005	920 x 1959	1082 x 2060
1000 x 2125	1010 x 2130	920 x 2084	1082 x 2185
1125 x 2000	1135 x 2005	1045 x 1959	1207 x 2060
1125 x 2125	1135 x 2130	1045 x 2084	1207 x 2185
1250 x 2000	1260 x 2005	1170 x 1959	1332 x 2060
1250 x 2125	1260 x 2130	1170 x 2084	1332 x 2185
1250 x 2250	1260 x 2255	1170 x 2209	1332 x 2310
1250 x 2500	1260 x 2505	1170 x 2459	1332 x 2560

Outer frame dimensions incl. 20 mm floor recess.
   
All dimensions indicated in mm
CS = Coordinating size
OFD = Outer frame dimensions,
CP = Clear passage dimensions


Calculation
of clear passage and outer frame dimensions (not for T90-2 type N39)

  

Further information is available in PDF format here:

• Frames for T30 and T90 fire-resistant doors and steel multi-purpose doors
  Download PDF file
   
  
• Frame mounting hardware for T30 and T90 fire-resistant doors and
  steel multi-purpose doorsl.
  Download PDF file
    
  
• Sills, anchor plans for T30 and T90 fire-resistant doors and
  steel multi-purpose doors.
  Download PDF file