Steel multi-purpose doors, D2 full leaf

D2 full leaf: Characteristics

Double leaf
Full leaf
Door leaf and frame galvanized and primed (RAL 9016)

Versions

Heat insulating with mineral wool filling
With additional glazing
Also available with top panel (full leaf only)
Also available with pass door integrated into the door leaf

Description
Dimensions (CS)
Standard 1100 x 1000 to 3250 x 5000 mm, extra large sizes up to 6300 x 5500 mm as customized version with visible vertical sheet joint

Door leaf (3-sided rebate)
Thickness approx. 54 mm, sheet metal 2.0 mm, leaf joints and overlaps with door sheets profiled in one piece (with no rusting joints), both door sheets interlocked, type of opening of active leaf: DIN left or rights, minimum leaf width 500 mm is necessary

Hardware
3-part hinges, 2 hinge plates on each leaf, 3rd hinge for CS height of 2500 or more, 4th hinge for CS height of 3500 or more, with ball bearing, mortice lock DIN 18250 with draw-back latch, prepared for profile cylinder, round black plastic handle, U-shaped with short plates, mounted espagnolette on the inactive leaf, 2 safety pins

Profile cylinder
lengthened by 0/10 mm (if standard hardware is used)

Frame (3-sided)
Standard corner frame with continuous EPDM rubber seal up to a door size of 3000 x 3000 mm, thereafter sturdy two-part special frame with continuous rubber seal.

Floor parting angle and double anchor for cementing or dowelling the door, optional counter frame or angular frame, frame generally bolted