Rd SKE 2 smokeproof sliding door



Characteristics

• Double leaf
• Full leaf in modular element design
• Leaf and frame profiles galvanized
• General building code test certificates
  - P-BWU 03-I 17.67.17 for double leaf T30 version
  - P-BWU 03-I 17.67.34 for double leaf T90 version



Versions

• Smokeproof in accordance with DIN 18095 Part 3
• With door ingoing brake (radial damper)
• Also available with hold-open system
• Also available for low headers, with optional inlet and/or header panel
• Also available with activation aids
• Also available with panel field glazing
  Standard pane size 270 x 630 mm,
  special pane sizes up to 450 x 1100 mm (longer lead times),
  requisite frieze width per panel field 190 mm on three sides,
  pedestal height 1150 mm.
• Also available with smokeproof pass door
  (for single leaf doors only, can be combined with T30 or T90 fire protection)
  Smallest dimensions with pass door 1675 x 2100 mm CP
• Also available with T30 or T90 in accordance with DIN 4102
  (see previous double page)
  

Description

Approved dimensions
Height: max. 4500 mm
Width: max. 7000 mm
Single leaf doors up to approx. 25 m² CP
Single leaf doors with movable central joint up to approx. 15 m²
Double leaf doors up to approx. 15 m² CP

• Sliding door leaves up to 1500 mm in width must not be
  higher than max. 2500 mm (CP in each case).

Door leaf
Thickness: approx. 67 mm
Sheet metal: 1 mm
Weight: approx. 55 kg/m²
  
Door leaf must overlap the clear opening:
by ≥ 70 mm at the sides
with T30 ≥ 100 mm
with T90 ≥ 150 mm by ≥ 75 mm at the header
(by ≥ 85 mm in the case of low headers)

Note: The upper horizontal smoke seal protrudes about 30 mm into the clear passage.

Storage area for opened door
= Clear opening width + 350 mm
   (plus additional 150 mm for low headers with closing weight an inlet)
  
Necessary header height (mm) for
normal header/wall installation ≥ 220
low header/ceiling installation ≥ 125

Wall clearance
≥ 200 mm

Sill for opening and storage area
recessed or surface mounted on the floor, or optionally without if the site has been prepared accordingly.

• On-site preparation if the sill is recessed in the floor. Floor sill is set with sill brackets, aligned and filled (on-site) prior to installation of the door.
• Evenness tolerance for finished floors with mounted sill in the opening and storage area in accordance with DIN 18202, Table 3, Line 4.
• A floor sill is not necessary if the floor is smooth and even, and without joints in the opening and storage area.
  

Additional features
Smokeproof pass door 1000 x 2000 mm without sill, for single leaf smokeproof sliding doors only (Rd SKE 1), can be combined with T30 or T90 fire protection. Smallest dimensions with pass door 1675 x 2100 mm CP.
     
Activation aids and special features on request
  

(*)
door without pass door 200 mm
door with pass door 250 mm
door with bag flap 280 mm

All dimensions in mm
CP = Clear passage dimensions
UEFF = Upper-edge finished floor
See page 5 for hardware and other optional features,
see pages 10/11 for planning and installation notes