PTS swing doors, standard version

- Various standard installations
- Self-closing
- Door leaves made of flexible plastic, transparent or coloured
- Transparent light strips on coloured swing door panels
- Sturdy design
- Tube structure hot galvanized
- Usually no need for a continuous frame
- Weight stands on the floor

Close-ups
Tube design and cross section
Description
Structure / Materials
- Single or double door units
- Heavy frame structure made of steel tubing with clamping strips, profile thickness matched to the size of the door, upper pivot point with thrust bearing, lower pivot point with pin and ball bearing or joint bearing on large doors, hot galvanized.
- Door leaves optionally:
- transparent plastic panels, 7 or 10 mm thick,
10 mm thick also with woven inlay - non-wearing, black rubber with woven inlay,
6 or 8 mm thick - black or grey plastic panels, 7 or 10 mm thick
- Optional light strips / windows
- Light strips between 1000 and 2000 mm height
- Welded windows 700 x 1000 or 500 x 700 mm
- Portholes with acrylic or safety glass
Dimensions
of single leaf doors for human passage up to double door units of about 35 m², larger dimensions on request
Operation / Drive
- Can simply be pushed open by people or vehicles
- The door is closed automatically by a torsion spring hinge in the upper part of the tube structure, which can be adjusted from the outside and is protected against dust and damage
Conditions that must be met on site
- Sturdy header made of steel, concrete or wood
- Continuous frame (may not be necessary, depending on the structural conditions)
Options
- Baffle plates welded on at different points and, possibly, clamped at the sides
- (Reinforced) Recesses for crane tracks, piping systems or through-wiring
- Door locking device
- Elevated lower pivot points
- Mounting board with welded pivot points
- Continuous frame with pre-assembled pivot points
- Door lock
- Structural parts in RAL colour of choice of V2A (MP)
- Pneumatic or electromechanical drive with a range of operating elements
Installation / Opening variants

2 x 90° in the clear opening (standard)

1 x 90° and 1 x 180° in front of the clear opening

2 x >90° in the clear opening

2 x 90° protected installation next to the clear opening
Special installation options
- Two swing doors above each over
- Swing door with strip curtain or swing flap above




