MZ-1 / MZ-2 with thin rebate



Single leaf multi-purpose steel door with thin rebate
Single and double full-leaf doors made of steel, with double-walled thermal insulation, glazing optionally available. Door leaf and frame galvanized and primed (powder-coated in RAL 9016).
Hardware
Per leaf: 1 hinge plate and 1 spring hinge in accordance with DIN 18272. DPC mortice lock with drawback latch incl. tumbler lock insert with key, with black rounded handle set, turn lock mounted. Spring hinge per leaf up to CS 1250 x 2250 mm 1 securing pin (2 if height exceeds 2125 mm). Reinforcement for door closer on hinge side. DPC mortice lock with drawback latch, with black rounded handle set (turn-lock mounted).
Frames
Corner frame with four-sided EPDM rubber seal, with masonry dowel. Wrap-around frame, counterframe, block frame or frame for lightweight partition walls optionally available
Surfaces
Door leaf and frame galvanized and primed (powder-coated in RAL 9016)
The following can also be supplied on request
• Glazing
• Top panel/Transom window
• Soundproofing
• Smoke protection in accordance with DIN 18095: 625 x 1750 to 1350 x 2500 CS, with door closer and lowerable floor seal or hump sill

 

Technical data

Model:	MZ-1 single leaf multi-purpose door
	Resistance class / Type Designation
Leaf dimensions	Coordinating size (CS)	Min./Max. width	650 - 1250
		Min./Max. height	1750 - 2125
	Door leaf	Thickness approx.	45
		Sheet thickness	0,88
	Type of opening	according to DIN	left / right
Versions	With thermal insulation (W/m² K, w/o glass) (1)		1,7
	With additional glazing		+
	With additional top panel/transom window		–
	With additional smoke protection		–
	With additional soundproofing (2)		approx. 39 dB
	(1) MZ-1 in acc. with EN ISO 12567-1, MZ 53-1 and MZ 53-2 in acc. with DIN 14351-1 UD for full leaf
	(2) MZ-1 = RWp on full leaf, MZ 53-1 and MZ 53-2 soundproofing, laboratory value only for version with lowerable floor seal
Available types of glazing	Standard rectangular types of glazing		Available standard glass dimension for MZ-1 and MZ-2 230 x 1360 with aluminium strips
	Standard rhombus-shaped glazing		–
	Standard round glazing		–
	Special glazing		–
Types of glass / Holding strips	Standard rectangular / rhombus-shaped / round glazing
	Wire glass 6 – 7 mm		–
	VSG laminated glass 6 mm		–
	ISO wire glass/VSG (laminated glass) 19 mm		–
	ISO-glass VSG (laminated glass)/VSG 19 mm		–
	Special rectangular glazing
	Wire glass 6 – 7 mm		–
	Wire ornamental glass 6 -7 mm		+
	ESG single pane security glass 6 mm		–
	VSG laminated glass 6 mm		–
	ISO wire glass/VSG (laminated glass) 19 mm		–
	ISO wire ornamental glass/VSG (laminated glass) 19 mm		+
	ISO-glass VSG (laminated glass)/VSG 19 mm		–

+ possible | – not possible
    
All dimensions indicated in mm, CS = Coordinating size, OFD = Outer frame dimensions, CP = Clear passage dimensions
   
The secured window strip on glazed doors is standard fitted on the hinge side (opposite hinge side is also possible on request). All glazing dimensions listed above refer to the clear look-through per door leaf (sketch shows an example for door size 1000 x 2000 mm) The standard steel glazing frames (powder-coated in RAL 9016) for rectangular glazing can additionally be fitted with cover profiles made from E6/EV1 anodized aluminium. Glazing profiles for round and rectangular glazing can also be supplied in polished stainless steel.


Technical data

Model:	MZ-2 double leaf multi-purpose door
	Resistance class / Type Designation
Leaf dimensions	Coordinating size (CS)	Min./Max. width
		Min./Max. height	1570 - 2125
	Door leaf	Thickness approx.	45
		Sheet thickness	0,88
	Type of opening	according to DIN	left / right
Versions	With thermal insulation (W/m² K, w/o glass) (1)		–
	With additional glazing		+
	With additional top panel/transom window		–
	With additional smoke protection		–
	With additional soundproofing (2)		–
	(1) MZ-1 in acc. with EN ISO 12567-1, MZ 53-1 and MZ 53-2 in acc. with DIN 14351-1 UD for full leaf
	(2) MZ-1 = RWp on full leaf, MZ 53-1 and MZ 53-2 soundproofing, laboratory value only for version with lowerable floor seal
Available types of glazing	Standard rectangular types of glazing		Available standard glass dimension for MZ-1 and MZ-2 with aluminium strips 230 x 1360
	Standard rhombus-shaped glazing		–
	Standard round glazing		–
	Special glazing		–
Types of glass / Holding strips	Standard rectangular / rhombus-shaped / round glazing
	Wire glass 6 – 7 mm		–
	VSG laminated glass 6 mm		–
	ISO wire glass/VSG (laminated glass) 19 mm		–
	ISO-glass VSG (laminated glass)/VSG 19 mm		–
	Special rectangular glazing
	Wire glass 6 – 7 mm		–
	Wire ornamental glass 6 -7 mm		+
	ESG single pane security glass 6 mm		–
	VSG laminated glass 6 mm		–
	ISO wire glass/VSG (laminated glass) 19 mm		–
	ISO wire ornamental glass/VSG (laminated glass) 19 mm		+
	ISO-glass VSG (laminated glass)/VSG 19 mm		–

+ possible | – not possible
   
All dimensions indicated in mm, CS = Coordinating size, OFD = Outer frame dimensions, CP = Clear passage dimensions
 
The secured window strip on glazed doors is standard fitted on the hinge side (opposite hinge side is also possible on request). All glazing dimensions listed above refer to the clear look-through per door leaf (sketch shows an example for door size 1000 x 2000 mm) The standard steel glazing frames (powder-coated in RAL 9016) for rectangular glazing can additionally be fitted with cover profiles made from E6/EV1 anodized aluminium. Glazing profiles for round and rectangular glazing can also be supplied in polished stainless steel.


Further information is available in PDF format here:

• Frames for T30 and T90 fire-resistant doors and
  steel multi-purpose doors.
  Download PDF file
   
  
• Frame mounting hardware for T30 and T90
  fire-resistant doors and steel multi-purpose doors.
  Download PDF file
    
  
• Sills, anchor plans for T30 and T90 fire-resistant
  doors and steel multi-purpose doors.
  Download PDF file