skip header skip banner skip navigation
skip content

Multi-purpose doors



Our steel doors are generally judged to be "universally excellent doors" that meet virtually all requirements. The rebate cover, which is similar to front doors, makes our multi-purpose doors suitable for use, not just in workshops and warehouses, but also in office or administration environments. A range of standard sizes can be supplied immediately.
We can also supply virtually any door to match your specific property. Our numerous clever solutions include, for example, a double door unit as an inspection opening with specifically designed mechanical operation and opening limitation, or a door finish that is matched to the façade of the house.



D1 full leaf multi-purpose door

D1 full leaf multi-purpose door

D2 full leaf multi-purpose door

D2 full leaf multi-purpose door

 

D1 glazing options

D1 glazing options

D2 glazing options

D2 glazing options

 


Multi-purpose doors: Description
Door leaf: double-walled, made of sendzimir galvanized sheet steel, filled with mineral wool for thermal insulation.
  
Type D:
three-sided thin rebate, the leaf joints and overlaps with the door sheets are profiled in one piece to avoid any joints that might rust, both door sheets are lapped.
  
Sill:
Standard: floor level (A); sills with 4-sided continuous frame (B1, B2, B3), with lower rebate (C) and sealing sills with lowerable floor seal (RS1) or hump sills (RS2) optionally available.
 
Special features/Special doors

  • Door closer
  • Panic lock
  • Butt wall connection
  • Ventilation grating (plastic, incorporated into the leaf)
  • Top panel/Transom window
  • Ventilation louvres / Special doors
  • Other (on request)

    CS = Coordinating size (order size)
    CP= Clear passage dimensions, whole door and/or both leaves
    

    Single-leaf multi-purpose doors

    CS 750 x 2000 LD  670 x 1959
    CS 875 x 1875 LD  795 x 1834
    CS 875 x 2000 LD  795 x 1959
    CS 875 x 2125 CP 795 x 2084
    CS 1000 x 2000 CP 920 x 1959
    CS 1000 x 2125 CP  920 x 2084
    CS 1125 x 2000 CP 1045 x 1959
    CS 1125 x 2125 CP 1045 x 2084
    CS 1250 x 2000 CP 1170 x 1959
    CS 1250 x 2125 CP 1170 x 2084
    CS 1250 x 2250 CP 1170 x 2209

    

    Two-leaf multi-purpose doors

    CS 1500 x 2000 * CP 1420 x 1959
    CS 1500 x 2125 * CP 1420 x 2084
    CS 1750 x 2000 * CP 1670 x 1959
    CS 1750 x 2125 * CP 1670 x 2084
    CS 2000 x 2000   CP 1920 x 1959
    CS 2000 x 2125   CP 1920 x 2084
    CS 2000 x 2500   CP 1920 x 2459
    CS 2125 x 2125   CP 2045 x 2084
    CS 2250 x 2250   CP
    2170 x 2209
    CS 2500 x 2500   CP 2420 x 2459

    * division up to CS width 1750: approx. 1/3 to 2/3, thereafter symmetrical; 1/2 to 1/2


    Standard glazing

    Standard glazing
    Standard glazingn is available in ten different shapes/sizes, each with glazing profiles made of steel, primed (powder coated) in RAL 9016.
        
        
       
        
        
    Standard rectangular glazing is available in four standard sizes:

    • 200 x 600 mm
    • 500 x 400 mm
    • 460 x 910 mm
    • 460 x 1500 mm
         
    Standard rhombus-shaped glazing is available in three square clear glass sizes:
    • 300 x 300 mm
    • 400 x 400 mm
    • 500 x 500 mm
      
    Standard round glazing is available in three clear glass diameters:
    • 300 mm
    • 400 mm
    • 514 mm
    Four different types of glass are available for all types of standard glazing:
    • Wire glass 6 -7 mm
    • VSG laminated glass 6 mm
    • ISO wire glass/VSG (laminated glass) 19 mm
    • ISO-glass VSG (laminated glass)/VSG 19 mm

      

      Special glazing


      Special glazing

      Three further types of glass are available for special glazing solutions:

      • Wire ornamental glass 6 -7 mm
      • ESG tempered safety glass 6 mm
      • ISO wire ornamental glass/VSG (laminated glass) 19 mm

       

      Special light cutouts can be realized in rectangular formats from 150 x 150 to 1000 x 1500 mm (minimum frieze width of 155 mm is necessary), as can multi-pane glazing with vertical and horizontal sash bars.
             
      Glass holding strips are also available in aluminium (E6/EV1 anodized) or stainless steel.
      skip teaser
       
      Go to top

      You might be interested in these topics as well