Hinge subconstructions

From subconstructions that have proven their worth millions of times to innovative further developments, Novoferm hinge subconstructions guarantee optimum stability and security.

Hinge subconstruction V8610:
The outstanding classic
For use in standard applications and for the stronger VS or VN hinge groups of the V8 type series:
• More than 200 hinge variants ranging from galvanized, to color painted, to gilded surfaces.
• Mortar tightness is achieved through a plastic protection box, fixed in position when welding the hinge subconstruction to the frame profile.
When the opening direction is changed, the hinge hole in the frame facing is closed again by screwing in the hexagon socket screw. Ideal for the artisan: The depth of the hinge frame sections can be adjusted. Special holes prevent the hinge frame sections from falling out of the frame and cause the hinge holes to be closed by way of a forced movement of the clamping plate.

Novoferm "ribbed hinge" V 8100/18:
The innovative further development
Offers top stability in a compact format. The sturdy housing construction as well as the special details of the outside wall of the housing and the hinge frame section strap durably prevent the hinge frame sections from tipping under load.
The added safety bonus: Three times as high a resistance to tearing out as a conventional hinge! In addition, the moveable parts of the construction cannot fall out of the housing. The overall height of the subconstruction is less than 15 mm, e.g. its ideal application lies in the field of gypsum plaster board partition construction frames with throat opening edges ≥ 15 mm.

Novoferm VX7611/3D:
For the heavy weights
The ideal hinge subconstruction for heavy door leaf weights and stresses. With a suitable hinge it can cope with door leaves weighing up to 150 kg. The shape of the housing and internal assembly, the size of the hinge hole and the hole pattern of the hinge frame section straps allow the hinge straps/door leaves to be adjusted in height and depth.
In addition lateral adjustment is enabled by two threaded spindles (outer hexagon socket screws) working in parallel, with the result that three-dimensional adjustability is achieved. The spindles can also be moved independently of each other. The system also permits technically correct, fine adjustment capable of bearing the load, also as possible tolerance compensation for frame, door leaf, and floor.
The hinge subconstructions VN 7608/120 3D and VN 7608/160 3D are identical in function and similar in design.

The device of further hinge subconstructions is possible. Please contact us.